Talon E+ Tuning Solutions
PLANET3 is a planetary gear set which reduces the rotation speed of the magnet used by the wheel speed sensor three times. For every three full rotations of the rear wheel, the magnet completes just one full rotation – effectively making the bike think it’s doing 1/3 the speed it is actually doing, thus increasing the pedal assist speed limit by a factor of 3. For the Giant models the ratio is limited to a factor of 1.5 instead of 3 (50% bump in speed limit) because Giant implemented checks for cadence vs. speed (gear detection) in 2023 that can result in your motor being locked and requiring a 150-300 EUR intervention to unlock it. That’s why dual planet setup is mandatory for Giant e-bikes and we STRONGLY DISCOURAGE you from trying to ride a single planet config with the ratio of 3:1 (3x increase in speed limit)!
This product page is for the 2026 Model year of the Talon E+! Please make sure to check your rear hub end cap profile on the braking side (left) against the photo in the gallery. If it doesn’t look like that – you have a different model year or a different model bike. In any of these cases, please send us an email or use the CONTACT page to get in touch!
Contents
1 x PLANET3 device consisting of sun gear, ring gear and 2x planet gear (with magnets)
3 x M5x10 ISO 14580 bolt with pre-applied Loctite 268
1 x Replacement end cap (only for stock hub)
Order for a friend group – Save Up to 20% on volume!
Have questions about this product?
Please contact us before you buy!
PLANET3 is a planetary gear set which reduces the rotation speed of the magnet used by the wheel speed sensor three times. For every three full rotations of the rear wheel, the magnet completes just one full rotation – effectively making the bike think it’s doing 1/3 the speed it is actually doing, thus increasing the pedal assist speed limit by a factor of 3. For the Giant models the ratio is limited to a factor of 1.5 instead of 3 (50% bump in speed limit) because Giant implemented checks for cadence vs. speed (gear detection) in 2023 that can result in your motor being locked and requiring a 150-300 EUR intervention to unlock it. That’s why dual planet setup is mandatory for Giant e-bikes and we STRONGLY DISCOURAGE you from trying to ride a single planet config with the ratio of 3:1 (3x increase in speed limit)!
This product page is for the 2026 Model year of the Talon E+! Please make sure to check your rear hub end cap profile on the braking side (left) against the photo in the gallery. If it doesn’t look like that – you have a different model year or a different model bike. In any of these cases, please send us an email or use the CONTACT page to get in touch!
Contents
1 x PLANET3 device consisting of sun gear, ring gear and 2x planet gear (with magnets)
3 x M5x10 ISO 14580 bolt with pre-applied Loctite 268
1 x Replacement end cap (only for stock hub)
Have questions about this product?
Please contact us before you buy!